Welcome to our official website! Here you can learn more about our products and services.
sales@engrock.net
+8615838838830

Requirements for Tunnel Rock Bolt Support

2026-10-27 14:00 Technical Team of Luoyang Gongyan


1. To guarantee the installation quality of crown rock bolts, dedicated rock bolt drilling rigs shall be adopted for crown bolting. The performance of the rigs must meet drilling requirements under hard rock conditions. Pneumatic leg rock drills can be used for the sidewall and haunch sections.

2. A bearing plate shall be installed for every rock bolt, and the plate shall be in close contact with shotcrete. For systematic rock bolts in Grade IV and V surrounding rock, bearing plates may be installed after secondary shotcreting to facilitate quality inspection of rock bolts.

3. Mark the installation positions of rock bolts with red paint on site.

4. The on-site tunnel supervisor shall keep a special record book for rock bolt acceptance. For each inspection and acceptance, record in detail the mileage stake number, surrounding rock grade, installation status, designed quantity and actual installed quantity of rock bolts. A copy of the acceptance record signed by the on-site supervisor shall be attached for each measurement application.

5. Supervision witness records are mandatory for grouting of hollow rock bolts. Grouting omission is strictly prohibited.

6. Fully grouted rock bolts shall not be struck after installation. No heavy loads shall be hung on the bolt ends within 3 days after installation.