Flat Face
This flat face is suitable for drilling very hard rock formations andcorrosive wall formations at high air pressures. When the bits is drilling,the faster the drilling speed, the less wear of the drill body.
Convex Face
This Convex face is suitable for low-to medium-pressure drilling ofsoft-medium hard rock formations, and the drill block is not easy tocorrode.The characteristics of this design are the low load of the sidebutton, the wear is not badly and the drilling speed is fast.
Concave Face
This Concave face is suitable for all rock formations, especially inmedium-hard and homogeneous rock formations, the effect is good.The blast hole deviation is small, and the slag discharge effect is good.
Double Gauge Face
This double-sided button face is suitable for drilling very hard rockformations at high air pressures. When the bits is drilling, drilling speedis fast, the bit body wear will also be less.
Drop Center
when using low-medium pressure to drillsoft- medium hard and fractured rock formations, in order to obtain fast rock drilling speed and less blasthole slope, this face shape is usually used.